Driveway Sealcoating
Residential driveway sealing for a darker finish, cleaner edges, and a surface that is easier to keep looking sharp through the season.
Serving Saint Paul, Minnesota & surrounding areas
Calls are answered 24/7
Protect Minnesota asphalt
Help slow cracking, raveling, and water damage with a clean, even seal coat that improves curb appeal.
Prep
Clean
surface
Even
Uniform
coverage
Clear
Cure
guidance
Sealcoating is simple when it is done with the right prep and the right conditions. Sealcoating St Paul provides Saint Paul sealcoating for driveways and parking areas with an emphasis on surface prep, clean edges, and a finish that cures properly.
If your asphalt looks gray, dry, or patchy, or water soaks in instead of beading up, it is usually time to consider asphalt sealing in Saint Paul. A quality seal coat helps limit moisture intrusion and oxidation, and it refreshes the surface so the pavement looks cared for.
Here is what you can expect from a professional Saint Paul seal coating visit:
You will get clear direction on cure time and when it is safe to walk and drive on the surface.
Residential driveway sealing for a darker finish, cleaner edges, and a surface that is easier to keep looking sharp through the season.
Commercial sealcoating for lots that need consistent coverage, controlled access during curing, and a plan that keeps your property usable.
Crack filling and crack sealing to reduce water entry and slow down crack spread before sealcoating or as a standalone repair.
Targeted asphalt repair for potholes and failed areas, including proper cutout and patching to restore a safer driving surface.
Crisp layout and restriping for stalls, arrows, fire lanes, and accessible markings to improve traffic flow and clarity.
Sealcoating Saint Paul pavement starts with cleaning and edge work. Coating over dirt, grass, or loose material does not last.
We look closely at low areas, drainage paths, and turning zones where wear shows up faster and needs the right plan.
A uniform finish matters. We aim for even texture and color with tidy borders along concrete and landscaping.
Cure time and adhesion depend on weather. We schedule work when conditions support a proper set and dry.
You will know when to allow foot traffic, when to drive on it, and how to avoid early scuffs and tracking.
Sealcoating St Paul is a local sealcoating company Saint Paul property owners can rely on for straightforward recommendations and careful application. Our work is focused on making asphalt look better now while helping it hold up longer against sun, water, and seasonal freeze-thaw.
You will always know what is included before work starts, what needs repair before sealcoating, and what can wait. If the pavement needs crack repair or patching to support a longer-lasting result, we will explain why, show you the areas, and outline options.
If you prefer to stop by, our office is located at 292 N Walnut St, Suite 4, Saint Paul, MN 55102.
Sealcoating in Saint Paul typically ranges from about $300 to $900 for many residential driveways, while larger driveways and small lots often land around $900 to $2,500+. Big commercial lots are commonly priced by square footage after a site walk.
Your final price depends on total area, pavement condition, how much crack repair or patching is needed, how much cleaning and edging is required, and access for equipment. The exact cost is confirmed after an on-site inspection and a written scope.
We review surface condition, note cracks and failed areas, and confirm what prep and repairs are needed before applying any seal coat.
We clear debris, edge vegetation, and clean the asphalt so the coating bonds to pavement, not dust and loose material.
If cracks or potholes are present, we address them first so the sealcoat is not asked to hide structural problems.
We apply an even coat and take time on borders, transitions, and overlap areas so the finished surface looks clean.
We review cure time, traffic restrictions, and simple do's and don'ts so the surface sets up the way it should.
If you want asphalt sealcoating in Saint Paul planned around prep, condition, and cure time, we can put together a clear scope for your property.
Call for a Free EstimateWe work throughout Saint Paul, including Highland Park, Macalester-Groveland, Summit Hill and Como Park, and we cover the surrounding metro cities below.
If the surface is structurally sound but looks gray, dry, or porous, it is usually a good candidate for sealcoating. If there are wide cracks, alligator cracking, or potholes, those areas typically need repair first so the seal coat is going onto stable pavement.
Most sealcoating needs a full cure period before vehicle traffic, and the timing depends on temperature, humidity, sun, and shade. We give specific guidance on-site based on the day's conditions and whether the driveway is in full sun or under heavy tree cover.
Yes, we handle residential asphalt sealcoating Saint Paul homeowners request as well as commercial properties that need a plan for access and cure time. Lots with higher traffic and turning zones may also need crack repair and patching to support the coating.
Small, tight cracks may be addressed with crack filling or crack sealing before the seal coat goes down. A seal coat alone does not stop active cracks from moving, so we recommend repairs first where needed.
Plan to have vehicles moved and keep the surface clear of items like basketball hoops, planters, and trash bins. If gates need to be unlocked or there are areas you want us to avoid, we will confirm those details before work begins.
Sealcoating is a protective topcoat applied to existing asphalt, while resurfacing adds a new layer of asphalt to rebuild the driving surface. If your pavement has widespread structural failure, resurfacing or patching may be a better match than a new seal coat.
Free Estimates
Tell us what you are sealing and what problems you are seeing. We will review the pavement condition, recommend any prep or repairs, and provide a written scope with realistic timing for cure and return to traffic.
Request a quote
Send the form and we will get back to you with next steps and a time for an on-site walkthrough.